Saint-Gobain/Masterflex Tygon® F-4040-A
Tygon® F-4040-A

Certification:REACH,RoHS

PRODUCT INTRODUCTION

•Anti-brittle
•Compatible with most petroleum-based products, hydrocarbons, and resistant to swelling and hardening
•High performance tube for small motor fuel and industrial lubricants, specially developed for transporting fuel and lubricants. It is commonly used for the transmission of gasoline, kerosene, civil combustion oil, cutting oil and glycol-based coolants.
•Low leaching,Low extractability protects the transported fluid or steam from incorporation of impurities
•Resistant to ozone and ultraviolet radiation
•Good flexibility

TECHNICAL PARAMETER

Brand
Saint-Gobain/Masterflex Tygon® F-4040-A
Hardness (Shore A)
57
Tensile Strength psi(Mpa)
1820(12.5)
Elongation %
310
Tear Strength Ib-f/in(KN/m)
167(29.0)
Proportion
1.26
Water Absorption,%24hrs.@23℃
0.49
Brittleness temperature
-37℃
Constant compression set rate,%22hrs.@70℃
65
Recommended maximum operating temperature
74℃
Note: The silicone tubing is not resistant to acids, alkali and organic solvents. So it is not recommended for transferring such substances. For the medium used, please refer to the “ Chemical Compatibility Table”.

SPECIFICATION PARAMETERS

PRODUCT PACKAGING

Original factory paper box for independent packaging

DOWNLOAD

Product Inspection Report
Chemical Compatibility Table
Chemical Compatibility Table(29.5KB) DOWNLOAD