Saint-Gobain Tygon S3™ E-3603
Tygon S3 E-3603

Certification:FDA 21CFR170-189 NSF-51 REACH (EC) No 1907/2006

PRODUCT INTRODUCTION

No oxidation, no pollution
Chemical resistance, almost applicable to all commonly used inorganic chemicals in the laboratory
Air tightness is better than rubber tube
High transparency and good flexibility, able to maintain flexibility even at -43 ℃
Anti-cracking, good durability
The smooth inner cavity helps prevent particles from gathering and makes cleaning easier. Each roll of tubing is marked every 30.4 cm for easy measurement.
BPA and phthalate free

TECHNICAL PARAMETER

Brand
Saint-Gobain TYGON S3 E-3603
Hardness (Shore A)
56
Tensile Strength psi(Mpa)
1750(12.1)
Elongation %
425
Tear Strength Ib-f/in(KN/m)
173(31.0)
Proportion
1.21
Water Absorption,%24hrs.@23℃
0.21
Brittleness temperature
-46℃
Constant compression set rate,%22hrs.@70℃
64
Recommended maximum operating temperature
74℃
Note: The silicone tubing is not resistant to acids, alkali and organic solvents. So it is not recommended for transferring such substances. For the medium used, please refer to the “ Chemical Compatibility Table”.

DISINFECTION METHOD

High temperature and high pressure sterilization——30 min at 121℃
Gas——Ethylene oxide
Gamma rays ——2.5 MRad

SPECIFICATION PARAMETERS

PRODUCT PACKAGING

Individually packaged in original cartons in compliance with GMP regulations
Use packaging bags that do not contain phthalates

DOWNLOAD

Product Inspection Report
Chemical Compatibility Table
Chemical Compatibility Table(29.5KB) DOWNLOAD